Effective Distance Of Remote Control; Installation; Unpacking; Setup - LEXIBOOK LCDDVD2TFFR Instruction Manual

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from
the product before being charged. Rechargeable batteries are only to be charged under adult
supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries
of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the
correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are not
to be short circuited. Do not throw batteries into a fire. Remove the batteries if you are not going to
use the product for a long period of time.
WARNING: Mal-function or loss of memory may be caused by strong frequency interference or
electrostatic discharge. Should any abnormal function occur, reset the unit or remove the batteries and
insert them again, or unplug the AC/DC adapter from the mains socket and replug it again.
Effective distance of the remote control: within 7 metres.
Note: when there is an obstacle between the TV and the transmitter, the transmitter
may not operate. When direct sunlight, an incandescent lamp, fluorescent lamp or
any other strong light shines on the remote sensor of the unit, the remote operation
may be unstable.
Unpacking the device
When unpacking, ensure that the following elements are included:
1 LCD display with integrated DVD player and DTV tuner
1 remote control
2 AAA/LR03 batteries
1 adapter
1 AC power cord
1 instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this TV
set and should be discarded.
Setting up the TV
Place the unit on a sturdy, horizontal, vibration-free surface. The set must not be subjected to vibrations or
shocks. Please observe the conditions in the safety instructions.
To operate the TV, you can use the keys on the right side and on the top of the LCD screen, or the remote
control's keys. Use the input and output connections on the left side of the screen to connect other devices
to the unit.

Antenna connection

Connect your antenna to the antenna socket located on the left side of the unit.

Computer connection

You may use your LCD display as a monitor/loudspeaker by connecting the S-video or VGA standard
interface to the video/audio interface of your PC. Then select the corresponding source ("VGA" source,
please refer to the section "Video source selection" on p.30).

HDMI connection

Your LCD display has an HDMI port, which allows you to connect directly High Definition equipments
(camcorder, satellite receptors, HD DVD player, computer or game console). Then select the
corresponding source ("HDMI" source, please refer to the section "Video source selection" on p.30).

Mains connection

Do not connect your TV to the mains supply before finishing all other connections. Use the AC/DC adapter
(AC 220V- 240V~ 50Hz) provided with the unit to connect the TV to a main socket.

INSTALLATION

27