Regional Codes; Tv Functions; Switching On/Off; Volume Setting - LEXIBOOK LCDDVD2TFFR Instruction Manual

REGION MANAGEMENT INFORMATION
This DVD Player is designed and manufactured to respond to the Region Management Information that
is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the
Region number of this DVD Player, this DVD player cannot play that disc.
This Region number of this DVD player is
Power ON/OFF
Once connected to the mains power, the unit automatically enters into standby mode and the power
indicator on the front panel of the LCD screen turns red.
1. Press the POWER button on the LCD display or the STANDBY
switch on the TV.
2. The power indicator turns green and after a few seconds, the LCD screen will light up.
3. Press again the POWER or STANDBY button to switch back to standby mode.
Note: the unit will automatically enter into standby mode after a few minutes of inactivity.

Volume setting

1. Press the VOL+ / VOL - keys on the TV or the VOL+/VOL- keys on the remote control to turn the
volume up or down.
2. To turn the sound off completely, press MUTE on the remote control.
3. Press MUTE again or a volume key to turn the sound back on.
Program selection
1. Press the CH+ / CH - keys on the TV or the CH+/CH- on the remote control to toggle the channels
upwards or downwards.
2. The numeric keys of the remote control can be used to enter the channel number directly:
• For a 1-digit program number, simple enter the required number.
• For a 2-digit program number, press the

RECALL

Press the RECALL key to toggle between the last viewed channel and the current channel.
Video source selection
Press the INPUT button on the remote control to access the "Source Menu". Use the ▲ and ▼buttons to
select the desired source: "TV", "SCART", "CVBS (AV)", "S-VIDEO", "VGA" (PC), "HDMI", "DVD", "DTV".
Press ENTER to confirm.
Note: Make sure all audio/video cables are connected.

LCD settings menu

In any mode, press the LCD-MENU button to access the LCD settings menus: "PICTURE" menu,
"SOUND" menu, "PARAMETERS" menu, "TIMER" menu, "FUNCTION" menu (refer to the section " LCD
MENU" ).
Note: The available settings depend on the selected source.
Picture mode (PMODE button)
Repeatedly press the PMODE button to select one of the following picture modes:
Standard Personnel
(Japan, Europe South Africa and Middle-East).

TV FUNCTIONS

key, then the program number.
Movie Sport
button on the remote control to
Soft Game
29