Direct Tune - Sirius XM RAdio XM Onyx User Manual

Using Your OnyX

Direct Tune

A channel can be tuned directly by entering the
channel number using the number buttons.
1 To directly tune to a channel press
direct.
2 Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to
the channel.
Jump
Depending upon how you configure the mode, pressing jump will either go to the
traffic and weather channel for the city of your choice which you select from a
list of the 22 most congested cities, or go to the last channel to which you were
listening.
TIP! By default jump is configured to tune to a traffic/weather channel. To select
a city for traffic and weather, or to configure jump to tune to the last channel to
which you were listening, refer to "Jump Settings" on page 79.
Return to Main Display Screen
Pressing and holding menu in most instances will return you to the main display
screen. In some cases, you may need to follow the instructions on the display
screen.
54
Direct Tune
Enter channel #
6 2 _