Sirius XM RAdio XM Onyx User Manual page 18

Vehicle Installation
Installing the Vent Mount:
1 Locate a vent with horizontal
louvers sturdy enough to hold your
PowerConnect Vehicle Dock and Radio.
2 If the vent louvers in your vehicle are
recessed, you may need to use the
longer vent clamps with the Vent Mount.
If so, remove the shorter vent clamps
and install the longer ones into the Vent
Mount. Be sure to observe the orientation of the vent clamps as shown.
3 Push the Vent Mount onto the vehicle vent as shown (1) until it hooks on
the rear of the vent louver (2).
Slide Extended Vent Clamps In
18
Remove End Cap
Extended Vent Clamps
Short Vent
Clamps
Slide Short Vent Clamps Out
Replace End Cap