Sirius XM RAdio XM Onyx User Manual page 42

Vehicle Installation
hold menu to return to the main display screen.
7 Ensure OnyX is tuned to channel 1,
the XM Preview channel. Upon power
up, OnyX should tune to channel 1 by
default, when it's not yet activated. If
it's not on channel 1, refer to "Listening
to Satellite Radio" on page 53 to learn
about how to tune a channel.
8 Turn on your vehicle's stereo system.
Set it to play from the auxiliary input
source. You should hear XM channel 1
through your vehicle's stereo system.
You are now ready to activate your
OnyX.
9 The audio level output of OnyX can be
increased or decreased as necessary to
match the audio levels of other sources
in your vehicle. Refer to "Set Audio
Level" on page 81.
If the signal reception is good, showing at
least one bar in the lower left corner of the
display, but there is no XM audio, be sure the vehicle's stereo system is set to the
cassette source (step 4). Also be sure that the audio level is set high enough to
be heard (step 5). Refer to "Troubleshooting" on page 92 for additional help.
42
Signal Indicator
SATELLITE
TERRESTRIAL
1
800-643-2112
siriusxm.com
XM Preview