Using The Remote Control - Samsung POWERbot SR20H905 Series User Manual

Using the remote control

there are two types of remote controls, type a and type B.
1 power/recharging
Power
Recharging
2 Cleaning modes
Auto clean
Spot clean
Max clean
Manual clean
Start/Stop
3 additional functions
Silence mode
Dust sensor
mode
Sound
inserting batteries
Open the battery cover by lifting it up
while pressing the locking tab, and
then insert the batteries as shown in
the illustration. Then, close the cover
until it clicks into place.
[A type] [B type]
ENGLISH-15
Turn POWERbot's power on/off
Select to recharge POWERbot at the docking station
while it is cleaning.
Select to automatically clean until the battery is
depleted.
Select to clean a localized area intensely
Select to make POWERbot clean space dividing
until the battery indicator flashes and the battery is
almost discharged.
Select to manually control and clean by using the
remote control
Select to start or stop cleaning
Select to clean with lower operational noise
✻ ✻ Turbo mode is not available
In Auto clean mode
fWhen dust is detected, POWERbot's suction will
become stronger will become stronger and it will
focus on cleaning the immediate area.
In Spot/Max/Manual clean
fWhen dust is detected, POWERbot's suction will
become stronger.
Each time you press this button, Sound Effects →
Mute is selected in this sequence.
✻ ✻ Remote control function NOT supported.