Maintenance & Storage; Control Symbols - Hayter Spirit 41 Instruction Manual

SAFETY PRECAUTIONS
Operation cont
If the machine has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the machine
to and from the area to be mowed, stop the blades. Release the
engine stop lever and ensure that the blades have stopped before
tilting the mower.
Never operate the machine with defective guards, or without
safety devices, for example deflectors and/or grass bag in place.
Do not change the engine governor settings or overspeed the
engine.
Start the engine carefully, with feet well away from the
cutterblade.
Do not tilt the mower when starting the engine.
Do not start the engine if standing in front of the discharge chute.
Do not put hands or feet near or under rotating parts.
Never pick up, carry the mower or lift the rear deflector whilst
the engine is running.
Never touch the exhaust / exhaust guard or cooling fins when
the engine is hot.

Control Symbols

S T O P
Engine Stop
THE CUTTERBLADE CAN CONTINUE TO ROTATE
AFTER THE MACHINE IS SWITCHED OFF.
Stop the engine and disconnect the spark plug lead:
• Before clearing blockages or unclogging the discharge
chute;
• Before cleaning / checking or working on the machine;
• After striking a foreign object. Inspect the machine for
damage and ensure necessary repairs are made before re-
starting and operating;
• If the machine starts to vibrate abnormally (check
immediately).
Stop the engine:
• Whenever you leave the mower;
• Before refuelling;
• Reduce throttle setting during engine shutdown.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment
is in safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and
replace if necessary.
Check the rear deflector and grassbag frequently for wear or
deterioration.
Height of Cut Adjustment
Replace worn or damaged parts for safety.
Wear strong work gloves when removing and reassembling the
cutterblade.
This machine contains spring loaded assemblies which could
cause a hazard when disassembled and re-assembled, this
maintenance should only be carried out by a Hayter authorised
dealer.
Inspect the exhaust periodically and replace if worn or leaking.
Never store the mower with petrol in the tank within an enclosed
area where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine and the surrounding
deck area free of grass, leaves or excessive grease.
If the fuel tank has to be drained, this should be done outdoors
and when the engine is cool.
6