BELGACOM DDS 4074 Getting To Know

Getting to know your Belgacom DDS 4074
Green light indicating:
Incoming call: flashes at ringing frequency.
Going out of radio cover: fast flashing.
Line keys:
Lift receiver.
Activate (long press).
Hang up or end of entry.
De-activate (long press).
Keys programmable by technician:
Programmable key 1, default option: Conference.
Programmable key 2 (long press), default option: Message.
Function keys:
Function is obtained by long press on key (two beeps).
Sending DTMF codes (long press).
Customizing your telephone (long press).
Adjusting your telephone (long press).
Activating the buzzer and de-activating the ringer,
and vice-versa (long press).
Multi-function keys:
The first function is obtained by a quick press (1 beep)
and the second by a long press (2 beeps).
Transferring a call. Redial the last
n° dialled (long press).
Calling from directory (personal or system).
Calling by name (long press).
During a call: adjust earphone volume.
In standby: lock/unlock keypad, backlighting on/off
4074 GB, GI (long press).
Headset
Display and display keys
socket
Comprises two lines giving access to several
(models
pages of information and indicating functions
4074 GB, GI)
accessible using keys corresponding to screen
lines:
Call icons:
Radio reception icons:
Battery icons:
Audio icons:
Navigator:
Scrolls several display pages and
confirms entries:
Display previous choice.
Erase last character entered.
Validate entry Scroll
or initiate a display
pages.
call by name.
Display next choice in list or send a
timed break (depends on context).
Line key corresponding
to display.
Incoming call.
Call in progress.
Placing on hold.
Limit of coverage (flashing).
Poor reception (light on).
Reception OK (light on).
Battery discharged or defective (flashing).
Battery on charge (flashing).
Battery charged (light on).
Ringer on/off.
Beeps/no beeps for keys.
Volume (1 to 4).
Beeps/no beeps indicating
going outside coverage.
Buzzer active/inactive
(on 4074 GC and 4074 GI).
Ringer volume (GAP mode).
GETTING STARTED
Installing the battery
Do not use force. Insert the lower part (1),
then gently press the upper part (2)
until it clicks into position.
Activating your telephone
display lights up
and beep generated
outside coverage (icon flashing) (icon on)
limit of area poor reception
*
(icon on) telephone not
*
reception OK registered in system
ADJUSTING YOUR TELEPHONE
Adjusting the audio functions
Adjusting the ringer, key beeps, volume, beeps when going out of radio coverage
and buzzer (on 4074 GI) on your telephone.
function icons displayed
switching between functions
transition between select validate show
statuses (except volume and quit next or
for volume) (1 to 4) programming previous
(2)
(1)
wait
Refer to section
on registration.