Table of Contents
Advertisement
!
Award BIOS Setup Utility
3.1.4 Integrated Peripherals
The settings on the screen are for reference only. Your version may not be
identical to this one.
VIA OnChip IDE Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
OnChip Primary IDE and OnChip Secondary IDE
These fields allow you to enable or disable the primar y and
secondary IDE controller. The default is Enabled. Select Disabled if
you want to add a different hard drive controller.
IDE Prefetch Mode
This allows data and addresses to be stored in the internal buffer
of the chip, thus reducing access time. Enable this field to achieve
better performance.
IDE Primary Master/Slave PIO and IDE Secondary Master/Slave
PIO
PIO means Programmed Input/Output. Rather than have the
BIOS issue a series of commands to effect a transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it
wants and then let the controller and the CPU perform the
64
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
K
VIA OnChip IDE Device
K
VIA OnChip PCI Device
K
Super IO Device
Init Display First
OnChip USB Controller
USB Keyboard Support
IDE HDD Block Mode
↑↓→← Move
Enter:Select
F5:Previous Values
Integrated Peripherals
Press Enter
Press Enter
Press Enter
PCI Slot
All Enabled
Disabled
Enabled
+/-/PU/PD:Value
F10:Save
F6:Fail-Safe Defaults
Item Help
Menu Level
ESC:Exit
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
