Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications For 230 Vac; Unit Specifications For 115 Vac - Hobart 210 MVP Owner's Manual

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications For 230 VAC

Rated Welding Amperage
Output Range
150 A @ 23 Volts
25 − 210
DC, 30% Duty Cycle
Solid/
Stainless
Wire Type
And Diameter
.023 − .035 in.
(0.6 − 0.9 mm)

4-3. Unit Specifications For 115 VAC

Rated Welding
Amperage Range
Output
90 A @ 19
Volts DC, 20% 25 − 140
Duty Cycle
Solid/Stain-
less
Wire Type
.023 - .035 in.
And Diameter
(0.6 - 0.9
mm)
.
A complete Parts List is available at www.HobartWelders.com
SECTION 4 − SPECIFICATIONS
Maximum Open-
Circuit Voltage
DC
34
Flux Cored
.030 − .045 in.
(0.8 − 1.2 mm)
Maximum
Open-Circuit
Voltage DC
28
Flux Cored Aluminum
.030 - .035 in.
.030 in.
(0.8 - 0.9
(0.8 mm)
mm)
Amperes Input at
Rated Load Output
KVA
230 V, 60 Hz,
Single-Phase
24 5.54
Aluminum
.030 − .035 in. 70 − 750 IPM (1.8 − 19.0 m/min) At No Load
(0.8 − 0.9 mm) 40 − 680 IPM (1.0 − 17.3 m/min) Feeding Wire
Amperes Input at
Rated Load Out-
KVA
put 120 V, 60 Hz,
Single-Phase
20 2.84
Wire Feed Speed Range
60 − 740 IPM (1.5 − 18.8 m/min) At No Load
40 − 600 IPM (1.0 − 15.2 m/min) Feeding Wire
Weight Overall
KW
W/ Gun Dimensions
Length: 19-1/2 in.
(495 mm)
79 lb Width: 10-5/8 in.
4.72
(36 kg)
(273 mm)
Height: 12-3/8 in.
(314 mm)
Wire Feed Speed Range
Weight Overall
KW
W/ Gun Dimensions
Length: 19-1/2 in.
(495 mm)
79 lb Width: 10-5/8 in.
2.41
(36 kg)
(273 mm)
Height: 12-3/8 in.
(314 mm)
OM-260 274 Page 11