Table of Contents
Advertisement
6. No spinning
Check if the clutch pawl
Replace the retarder clutch.
7. Too much spinning noise
If the washing machine
is set horizontally?
If the motor is fastened
If the bearing of the retarder
vibrate resonantly with the
If the balance ring is rubbing
The hanger seat is lack of oil.
Inject oil at the hanger seat.
Automatic Washing Machine
The washing and
draining are normal.
Check the On/Off point of the
microswitch and stop switch.
Normally
is pulled enough.
Yes
No
If the hanger is
wrongly used?
No
If the noise of the motor
is too much?
No
tightly?
Yes
is well?
Yes
If the departing of
the ratchet and pawl
is well?
No
If the machine body
cabinet?
No
the outer tub cover?
No
If the connecting pipe
or the wire unit bumps
the outer tub?
No
Maintenance service and trouble shooting
No On/Off point
Replace the microswitch
or stop switch.
No
Replace the drain motor.
At this time please check
if the drain motor is well.
Yes
Set the machine horizontally.
Yes
Replace the hanger.
Yes
Replace the motor.
No
Fasten the motor.
No
Replace the retarder.
Adjust the angle or the distance of
Yes
the ratchet and pawl. The distance
between the ratchet and the pawl is
above 2mm.
Yes
Adjust the cabinet to acquire
balance.
Yes
Adjust the gap between the
balance ring and the outer tub.
Yes
Fix the connecting pipe and
the wire unit.
Model: XQB50-10
Hide quick links:
Advertisement
Table of Contents
