General tools BT8010 Setup & Operation Manual page 3

DISCLAIMER:
The information and specifications in this
manual pertain to the unit as it was supplied
from the factory at the time of printing.
Because we are committed to making
constant improvements, General International
reserves the right to make changes to
components, parts or features of this unit as
deemed necessary, without prior notice and
without obligation to install any such changes
on previously delivered units. Reasonable
care is taken at the factory to ensure that the
specifications and information in this manual
corresponds with that of the unit with which
it was supplied. However, special orders and
"after factory" modifications may render some
or all information in this manual inapplicable to
your machine. Further, as several generations
of this model of dust collector and several
versions of this manual may be in circulation,
if you own an earlier or later version of this
unit, this manual may not depict your machine
exactly. If you have any doubts or questions
contact your retailer or our support line with
the model and serial number of your unit for
clarification.
TO FILE A CLAIM
To file a claim under our Dust collectorard
2-year Limited Warranty, all defective parts,
components or machinery must be returned
freight or postage prepaid to General®
International, or to a nearby distributor,
repair center or other location designated by
General International.
®
For further details call our service department
toll-free at 1-888-949-1161.
Along with the return of the product being
claimed for warranty, a copy of the original
proof of purchase and a "letter of claim" must
be included (a warranty claim form can also
be used and can be obtained, upon request,
from General International or an authorized
®
distributor) clearly stating the model and serial
number of the unit (if applicable) and including
an explanation of the complaint or presumed
defect in material or workmanship.
14102811
3