Before Starting; Maintenance And Servicing - General tools BT8010 Setup & Operation Manual

OPERATING
INSTRUCTIONS
CAUTION: Always turn on the dust
collector before starting your dust-producing
machinery and always stop the dust-
producing machinery before turning off the
dust collector.

BEFORE STARTING

1. To minimize airborne dust make sure that
all hoses, fittings and clamps are secure
and airtight.
2. For maximum system efficiency,make sure
a cover is installed on any unused hose
inlet openings.
3. Never operate the machine without the
filter bag and the collection bag properly
installed.
4. The sound level of this machine is rated at
approximately 80-85 db during operation.
Make sure that adequate hearing
protection is used and that the overall
sound level within the working environment
is taken into consideration.
CAUTION: Make sure the switch is in the
"OFF" position before plugging in the power
cord.
MAINTENANCE &
SERVICING
WARNING! Make sure the switch is in
the "off" position and unplug the unit from
the power source before performing any
maintenance.
This machine operates on 120 V; if you
suspect any electrical problems call a
qualified electrician to do the verification of the
electrical circuit or the machine. If you need
!
14102811
13