General tools BT8010 Setup & Operation Manual page 12

5. FASTEN THE VERTICAL SUPPORTS to
the base using the long carriage bolts (O)
and nuts (N) (fig 7).
6. ATTACH THE FILTER BAG (B, fig 8) with
a belt clamp (C, fig 8) and hang it from the
support arm.
CAUTION: Use caution and wear gloves
when handling metal parts such as the belt
clamps, which can cut if handled carelessly.
7. ATTACH THE COLLECTION BAG with a
belt clamp (fig 9).
8. ATTACH THE HOSE (K, fig 10) to the
bottom of the impeller / separator assembly
(D) with a hose clamp (J).
9. FASTEN THE HOSE FITTING (I, fig11) to
the other end of the hose (K) with a hose
clamp (J).
12