Partsidentification
A Main body
1 System outer foil
2 Foil frame
3 Foil frame release
buttons
4 Cleaning shutter
5 Finger rest
6 Side terminals
7 Power switch
8 Battery capacity lamp
9 Charge status lamp
: Outer foil section
; System outer foil
release buttons
< Inner blades
= Trimmer
> Trimmer handle
Water inlet
B AC adaptor (RE7‑59)
Adaptor
Power cord
Appliance plug
C Charging stand
(RC9‑83)
Charging terminals
Stand socket
Usingthecarryingholder
The shaver can be kept vertically or horizontally.
When transporting the shaver, you can use the
carrying holder to protect the outer foil and prevent
erroneous operation of the switch.
• When transporting the shaver, be sure to clean off
any shavings before attaching the carrying holder.
Attachingthecarryingholder
Attach the carrying holder as illustrated.
• Check that all four protrusions on the
shaver are inserted securely.
Removingthecarryingholder
Remove the carrying holder while
pressing down on both sides.
D Carrying holder
E Cleaning brush
F Oil
13