CleaningTheShaver - Panasonic ES-ST23 Operating Instructions Manual

Readinglampswhenusing
When the battery capacity is low
The battery capacity lamp ( ) blinks when operating
the shaver.
• You can shave 2 to 3 times after the battery capacity
lamp ( ) blinks (This will differ depending on usage.)
• A full charge will supply enough power for approx. 14
shaves of 3 minutes each.
Clean

Cleaningtheshaver

1. Remove the shaver from the charging
stand.
2. Apply some hand soap and some
water to the outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
16
To remove light dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. Turn the shaver off.
• Rinse with water and
shake up and down
2
several times to
remove the water.
▼
For heavy dirt
4. Turn the shaver off
after 10 ‑ 20 seconds.
5. Remove the outer foil
section and turn the
shaver on.
6. Clean the shaver and
the outer foil section
with running water.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
▼
▼