Sofailounqe Conversion; Doors/Privacy Dividers; Interior Liqjltinq - Fleetwood 1997 Discovery Owner's Manual

LilliNq
Wirh
YOUR MOTOR HOME
To convert a sofa/lounge into a bed:
1. Remove sofa bolsters.
2. Lift front of sofa frame up and out.
3. Push the back of the lounge back and down.
4. Push the seat belts through the space between the lounge
back and seat.
To restore the sofa/lounge:
1.
Pull the seat belts back up through the space.
2. Lift the front edge of the sofa frame up, and push it back.
3. The sofa back will come up.
4. Push the sofa into position and replace sofa bolsters.
The dividers allow you to separate areas in the motor home.
They glide on nylon rollers. They are held closed by a catch.
When the dividers are open for traveling, be sure to attach the
catch to keep them from sliding back and forth.
Both decorative and 'utility' style 12-volt or llO-volt lighting
fixtures may be used in your motor home. Utility style fix-
tures may be either single or dual brightness. A slide switch
selects either single or dual brightness. For your convenience,
some lights are operated from wall switches. Clean the lenses
with soapy water.
SOfA/LoUNqE
CONVERSioN
DOORS/PRivACY
DividERS
INTERiOR LiqlfTiNq
CAUTION
Some of the lighting fix-
tures may be equipped
with halogen bulbs. The
bulbs and fixtures may
get very hot when they
are on. Do not touch
these lighting fixtures
when they are on. Allow
them to cool before at-
tempting to replace a
bulb.
DiSCOVERY - COPYRiqHr 1996, FlEETWood ENTERPRisES, INC.
All RiqHTs RESERVEd.