Fleetwood 1997 Discovery Owner's Manual page 95

PLUMBING SYSTEMS
The plumbing systems in your motor home are constructed of
thermoplastic materials. Holding tanks and piping compo-
nents are strong, lightweight, and corrosion resistant.
Fresh water is available from either an external "city water"
hookup or on-board storage.
The external system is pressurized by the water system at an
RV
park or city water supply. The connection is located inside
the city utility cable compartment on the
left
side of the motor
home.
To connect to pressul1zed city water:
1. Connect one end of a potable water hose to the RV park or
city water supply. This
will
usually be a faucet or valve similar
to your garden hose valve at home.
2. Run the city water supply for a few seconds to clear the line.
Turn off the water.
3. Attach the other end of the potable water hose to city water
connection. Make sure all connections are tight.
4. Turn on the RV park/city water supply. Open all faucets inside
the motor home to clear the lines. Then turn off faucets.
DiSCOVERY - CopYRiq/1T 1996, FIEEflvood ENTERPRisES, INC.
All Riq/ITS RESERVEd.
FRESh WATER
SYSTEM
EXTERNAl
FRESh WATER
Hook,.. Up
CAUTION
Since water pressures at
campgrounds vary, we
recommend you install
an in·line pressure regu-
lator at the water supply
faucet. This will protect
the motor home water
system and your supply
hose from excessively
high water pressure.
05, 1