Fleetwood 1997 Discovery Owner's Manual page 71

Your motor home is equipped with a rear view video monitor
system. The camera is located at the top rear of the motor
home. The rear view picture is displayed on a video monitor
screen. The monitor screen may be overlaid with a distance
scale reference which gives approximate distance of objects to
the rear of the motor home.
To operate the video monitor:
1. Turn on the ignition switch.
2. Shift the transmission to R.
To override normal operation, the ignition switch must be on and
power must be on at the monitor.
Using the video monitor will take practice. Always allow
more space for maneuvering until you are comfortable with
the system. Check the side-mounted mirrors often while
driving and especially during lane changes and when backing
up.
The camera lens is exposed to road dirt and will get dirty
often. When necessary, clean the camera lens and monitor
screen with a quality glass cleaner and nonabrasive cloth or
towel.
In keeping with good engineering practice, and to meet the
requirements of chassis manufacturers, certain chassis and
underbody components of your motor home have been coated
with an undercoating material. This material is intended to
assist in protecting these components from corrosion or other
effects of weather and road conditions. Please be aware that
certain areas of the motor home do not have undercoating
applied.
ON ThE ROAd
REAR ViEW VidEO
MONiTOR SYSTEM
The rear view video moni-
tor system provides a gen-
eral view of the road and
objects to the rear of the
motor home. Your percep-
tion of this view and the re-
lationships of objects to
the motor home and each
other will be different from
that seen in a rear view
mirror. light conditions
and the adjustment of the
screen controls will also
affect your perception. Al-
ways use the side-
mounted rear view mirrors
with the video monitor
system.
Body
UNdERCOATiNG
DiSCOVERY - CopYRiqln 1996, FLEETWood ENTERpnisES, INC. All niqllTS RESERVEd.