Preparation; Supplied Accessories; Attaching/Detaching The Tv Stand; Detaching The Stand Neck For Wall Mounting - Sharp LC-42SB45U Service Manual

Preparation

Supplied accessories

Note：
1．Always use the AC cord supplied with the TV.
2. AC cord enclosed in this product is for 110-125V.In using it on the 125-240V AC,pls consult the
following:
SHARP ELECTRONICS CORPORATION,LATIN AMERICA GROUP 6100 BLUE LAGOON
DRIVE,SUITE 150,MIAMI,FLORIDA 33126,U.S.A

Attaching/Detaching the TV Stand

Confirm that there are 4 screws supplied with the stand unit
1.
2. ○ Insert the stand into the openings on the buttom of the TV
1
2Insert and tighten the 4 screws into the 4 holes on the
○
2.
buttom of the TV.
Note:
To detach the stand,perform the steps in reverse order

Detaching the stand neck for Wall mounting

Loosen the 4 screws that secure the stand neck by using
○
1
1.
a cross-head screwdriver
○ Remove stand neck from the TV set.
2
Loosen the 4 screws and pull out hinge plate
2.
Place the hinge plate in the TV set as illustration shown
○
1
3.
Place the stand cover in the TV set and tighten the 4 screws
○
2
Into the 4 holes
2008-03-14
7
LC-42SB45U