Installation Of Batteries In The Remote Control Unit - Sharp LC-42SB45U Service Manual

LC-42SB45U
preparation

installation of batteries in the Remote Control Unit

If the remote control fail to operate TV functions,replace the batteries in the remote control unit
1. Open the battery cover .
CAUTUION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
1．Do not mix batteries of different types. Different types of batteries have different characteristics.
2．Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
3．Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you find
any chemical leakage, wipe thoroughly with a cloth.
4 The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
5If you will not be using the remote control unit for an extended period of time, remove batteries from it.
using the remote control unit
Use the remote control unit by pointing it towards the
remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
2. Inser t two "AA " size batteries
(supplied with the product)
.Place the batteries with their terminals
Corresponding to the (+) and (-)
Indications in the battery compartment
8
3. Close the battery cover