Table of Contents
Advertisement
1
2
1
2
3
ATTENTION
Temporarily place the heater in position and
place 4 locator bolts through the mounting
plate. Cut the carpet using the heater mounting
plate as a template. Remove the heater and
carpet remnant.
– (1) Air Top 2000 Heater
– (2) Mounting Bracket
Fig. 5
ATTENTION
Previous to mounting the heater, secure both
the exhaust tube and Intake tube to heater.
Connect a 90 degree fuel line elbow that points
towards the left side of the vehicle if the heater
were installed.
(Do NOT mount heater at this time)
– (1) Combustion Air Intake Tube
– (2) 90 Degree fuel Line Adapter
– (3) Exhaust Tube
Fig. 6
10
Dodge Sprinter Passenger Van
Advertisement
Table of Contents
