Viii. Options And Accessories - Pride Mobility jazzy 1143 Owner's Manual

V I I I . O P T I O N S A N D A C C E S S O R I E S
NOTE: Be sure you are on a flat level surface before activating the power elevating seat.
POWER ELEVATING SEAT OPERATION
You can control the power elevating seat through the toggle switch located on the armrest. See figure 22.
WARNING! Do not allow the motor to run more than a few seconds after the mechanism
reaches the top or bottom limit.
n To raise the power elevating seat, push the toggle switch forward. Releasing the toggle switch returns the
switch to its center (upright) position. To continue your lift, push the toggle switch forward again. Once the seat
reaches its highest extension, the lift action stops; you should continue to hear and/or feel the lift motor running.
This is because there is a clutch mechanism that allows the motor to continue running after the lift has reached
its limit. This clutch works at both the top and bottom extensions of the lift. In order to prolong the life of your
lift mechanism, please do not allow the motor to run more than a few seconds after the mechanism reaches the
top or bottom limit.
n To return the seat to its lowest position, pull the toggle switch toward you. Releasing it stops the motor.
When returning to the lowest position, always be sure that the mechanism has reached its lowest limit.
n To use the swivel feature, locate the swivel lever under the seat. It is located on the opposite side of the
controller. Push down on the lever and the seat can be swiveled 90 degrees.
Figure 22. Power Seat Switch
38 www.pridemobility.com
POWER SEAT SWITCH
AUS Jazzy 1143/RevF/Apr03