Wireless Transfer - Nikon coolpix Manual

Troubleshooting

Wireless Transfer

Problem
The camera is not detected by
the Wireless Camera Setup Util-
ity.
SSID is not displayed.
Connection to the access point or
server failed.
Wireless transfer was terminated
during image transfer, and trans-
fer failed.
Pictmotion movies were not wire-
lessly transferred.
176
Cause/Solution
• Set the camera to L (auto) mode.
• Select [PTP] for [Interface] > [USB] in
the setup menu.
• Configure a profile device.
• SSID is set to hide.
• Signal strength is poor.
• Move the camera closer to the access
point or computer.
• Remove obstruction between the
camera and profile device.
• Adjust the direction of the camera so
it can receive a better signal.
• A profile for home wireless LAN is set
in the procedure for public wireless
LAN.
• Connect the computer and camera
and start the Wireless Camera Setup
Utility. Then choose the action
[Rename/Delete profiles], choose the
profile from the list, and click [View
Profile] to confirm the information.
• Turn the camera off and on again, and
try again.
• Battery is running out.
• [Easy Trans. (no PM)] is selected in
wireless transfer menu.
• Pictmotion movies cannot be trans-
ferred from a Macintosh.
c
24,
126
134
142
17, 18
150