Wireless Transfer
Problem
The camera is not detected by
the COOLPIX CONNECT Utility.
SSID is not displayed.
Connection to the access point or
server failed.
Wireless connection was termi-
nated during picture upload, and
upload failed.
Cause/Solution
Select [PTP] for [Interface] > [USB] in the
setup menu.
• Configure a network profile.
• SSID is set to hide.
• Signal strength is poor.
• Move the camera closer to the access
point.
• Remove obstruction between the
camera and access point.
• Adjust the direction of the camera so
it can receive a better signal.
• A profile for home wireless LAN is set
in the procedure for public wireless
LAN.
• Confirm network profile information
using the camera's setup menu and
the Utility.
• Signal strength is poor.
• Move the camera closer to the access
point.
• Remove obstruction between the
camera and access point.
• Battery is exhausted.
Troubleshooting
c
120
139,
130
133
139
–
–
–
22
171