Instructions For Lithium Battery; Voltage Ratings - Quanmax QDSP-1000 Series User Manual

remove the component's antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.
When transporting a sensitive component, first place it in an antistatic container

or packaging.
Handle all sensitive components at an ESD workstation. If possible, use

antistatic floor pads and workbench pads.
Handle components and boards with care. Don't touch the components or

contacts on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,

magnetic, or radioactive fields.
 Instructions for Lithium Battery
Danger of explosion when battery is replaced with incorrect type. Only replace
with the same or equivalent type recommended by the manufacturer.
Do not dispose of lithium batteries in domestic waste. Dispose of the battery
according to the local regulations dealing with the disposal of these special
materials (e.g. to the collecting points for disposal of batteries)
 Voltage Ratings
The external power adaptor of the QDSP-1000 series has the following voltage
ratings:
Input: 100-240 VAC, 50-60 Hz

Output: 40W, +19VDC/ 2.1A output

QDSP-1000 Series User's Manual
WARNING
7
Safety Instructions