Lenovo ThinkCentre M800 User Manual page 68

1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer cover. See "Removing the computer cover" on page 52.
3. Locate the 3.5-inch storage drive you want to replace. See "Computer components" on page 4.
4. Disconnect the signal cable and the power cable from the 3.5-inch storage drive.
5. Slide out the 3.5-inch storage drive bracket to remove it from the computer.
Figure 19. Removing the 3.5-inch storage drive bracket
6. Flex the sides of the blue bracket to remove the 3.5-inch storage drive from the bracket.
7. Take the new 3.5-inch storage drive out of the static-protective package.
8. Flex the bracket and insert the pins
Do not touch the circuit board
Figure 20. Installing the 3.5-inch storage drive into the bracket
58
ThinkCentre M800 and M900 User Guide
1 – 4 on the bracket into the holes in the new 3.5-inch storage drive.
5
on the bottom of the 3.5-inch storage drive.