Lenovo ThinkCentre M800 User Manual page 64

7. Align the three plastic tabs on the right side of the new front bezel with the corresponding holes in the
chassis. Then, pivot the front bezel inwards until it snaps into position on the left side.
Figure 12. Installing the front bezel
8. Connect the cable to the front panel connector in the system board. See "Parts on the system board"
on page 5.
9. Reinstall the dust shield if you have removed it. Align the edges of the dust shield with the edges of the
front bezel. Then, press the dust shield inward until it snaps into position.
Figure 13. Installing the dust shield
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 74.
54
ThinkCentre M800 and M900 User Guide