Security Functions; Password Lock - SoftBank 920P User Manual

PIN Lock & Cancellation (PUK)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering Personal Unblocking Key (PUK/PUK2).
For information about PUK/PUK2, contact SoftBank Customer Center,
General Information ( P.20-34).
Emergency Numbers (110, 119, 118) can be dialed even in PUK/PUK2
entry window.
In PIN lock mode, enter PUK/PUK2
1
Enter new PIN/PIN2
2
Reenter new PIN/PIN2
3
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. (Even turning off power is counted as one incorrect
entry.) Write down PUK.
For procedures required to unlock USIM Card, contact SoftBank
Customer Center, General Information ( P.20-34).

Security Functions

Password Lock

Set Password Lock to require Phone Password for using
920P except for turning ON/OFF.
Main Menu Settings Security
Enter Phone Password
1
When Password Lock is set,
To cancel Password Lock, enter Phone Password in Standby. If
Phone Password is incorrectly entered five times, 920P turns off.
Note
Emergency numbers (110, 119, 118) can be dialed even when
Password Lock is active.
Turning off power cannot cancel Password Lock.
Calendar event tone or Alarm is disabled in Password Lock.
When Password Lock is set and calls are received, names and images
saved in Phone Book do not appear except phone numbers.
The following items are unavailable while Password Lock is set. Cancel
Password Lock to use:
Event Alerts (Event Indicators, Display Indicators, message ringtone
and Alarm)
Shortcut icons
S! Quick News
<Default> OFF
Password Lock
appears in Standby.
12
12-3