Installing And Connecting The Refrigerator - Waeco CR50 Operating Manual

CoolMatic
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
DANGER!
D
If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
NOTICE!
A
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
 The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
Observe all the other installation instructions in this section.
7.2 Installing the refrigerator
NOTICE!
A
 Fasten the device as described in the operating manual to
prevent hazards.
 Keep objects clear of openings in the housing or mounting
structure (such as ventilation slots).
 The refrigerator is only suitable for installation in a fitted niche.
Once it is installed, only the front of the appliance may be
accessible.
EN

Installing and connecting the refrigerator

41