Advertisement
OPERATING
INSTRUCTIONS
identification
of parts
Floor
Console
Indoor
unit
--One-five
--
One-fo
ur
On e-th ree
--One-twin
Indoor unit
1. Air flow louver (at air outlet)
2. Air inlet(with air filter installed)
3.
Remote controller
4.
Installation part
5.
Display panel
6.
Connecting pipe
Outdoor
unit
7. Drain hose, refrigerant connecting
pipe
8. Connective
cable
9. Stop valve
10. Fan hood
DISPLAY PANEL:
@
©
©
®
OPERATION
indication
lamp
This indicator illuminates when the unit is
operational.
TIMER
indication
lamp
Lights up during the Timer operation.
DEFROST
indication
lamp(Cooling
and
Heating
models
only) or Fan only indication
lamp
(Cooling only type):
Lights up when the air conditioner
starts
defrosting
automatically
in the heating operation
or if the fan only mode is selected.
Temporary
button
This button is used to operate the unit
temporarily
in case you misplace the remote
controller
or its batteries are exhausted.
One
press of the manual control button leads to
the forced AUTO operation.
If you press the button
twice within five seconds, the unit will operate
under the forced COOL operation.
The forced
COOL operation
is used for testing purposes
only, please do not choose it unless it is
necessary.
Display panel
Infrared
signal
receiver
\
@@
@
9
Advertisement
