The Printed Image Is Different From The Image On The Computer; When Printer Is Not Functioning Properly - Ricoh SP 3600dn User Manual

Problem
Print ends mid-job.
"Resetting job..." appears and
printing is suspended.
Printing did not start even
though the specified print time
has already passed.

The Printed Image is Different from the Image on the Computer

Problem
The printed image is different
from the image on
computer's display.
Images are cut off, or excess
pages are printed.

When Printer Is Not Functioning Properly

Problem
Paper is not fed from the
selected tray.
Prints do not stack properly.
Causes
An error might have occurred.
Memory is insufficient.
The time set on the printer or
computer is incorrect.
When you use some functions, such as enlargement or reduction,
the the layout of the image might be different from that displayed on
the computer display.
If you are using paper smaller than the paper size selected in the
application, use the same size paper with that selected in the
application. If you cannot load paper of the correct size, use the
reduction function to reduce the image, and then print.
For details, see the printer driver's Help.
When you are using a Windows operating system, the printer
driver settings override those set using the control panel. Set the
input tray you want using the printer driver.
For details, see the printer driver's Help.
• Paper is damp. Use paper that has been stored properly. See
page 31 "Paper Precautions".
• If printed sheets come out curled, use the standard tray
extension. See page 10 "Guide to Components".
Other Printing Problems
Solutions
Check the printer's display
panel to see if an error has
occurred.
In [System], select [Memory
Usage] to [Font Priority].
Set the correct time on the
printer or computer.
Solutions
Solutions
71