Appendix
Caring for your telephone
¤
Wipe the base, charger and handset with a damp cloth (do not use solvents) or
an antistatic cloth.
¤
Impairments in the high-gloss finish can be carefully removed using display pol-
ishes for mobile phones.
Never use a dry cloth, this can cause static.
Contact with liquid
If the handset has come into contact with liquid:
1 Deactivate the handset and remove the battery immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with the battery compartment open and
the keypad facing down in a dry, warm place for at least 72 hours (not in a mi-
crowave, oven etc.).
4 Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will usually be able to use it again.
Specifications
Technology:
Size:
Voltage:
Capacity:
We recommend the following battery types, because these are the only ones that
guarantee the specified operating times, full functionality and long service life:
u
Yuasa AAA 800 mAh
The device is supplied with two approved batteries.
!
Nickel-metal-hydride (NiMH)
AAA (Micro, HR03)
1.2 V
550 – 1000 mAh
Appendix
219