Storage Features - Electrolux EI23CS55GS1 Use & Care Manual

CAUTION
To avoid injury from breakage, handle tempered
glass shelves carefully. Sudden temperature
changes can cause glass breakage
NOTE
Features may vary according to model.
Your refrigerator includes Custom Design
that are designed to catch and hold accidental spills.
You can easily adjust shelf positions in the fresh food
compartments to suit your needs. The shelves have
mounting brackets that attach to slotted supports at the
rear of each compartment.
To change the position of a shelf:
1 Before adjusting a shelf, remove all food.
2 Lift the front edge up and pull the shelf out.
3 Replace by inserting the mounting bracket hooks
into the desired support slots.
4 Lower the shelf and lock into position.
Shelf features
Full Custom Design
TM
glass shelves
TM
Shelf (varies by model)

Storage Features

Half Custom Design
Drawers
Your refrigerator includes a variety of storage drawers.
These drawers are located in fixed positions at the
bottom of the fresh food compartment.
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.
Opening Crisper Drawer
Crisper humidity control
Crisper drawers include a sliding control for adjusting
the humidity inside the crisper. Leafy vegetables keep
best when stored with the Humidity Control set on
Higher Humidity. Fresh fruits keep best when stored
with the Humidity Control set on Lower Humidity.
Humidity Control
Higher
Humidity
Adjusting Crisper Humidity
Shelf
TM
Lower
Humidity
19