Replacing Light Bulbs - Electrolux EI23CS55GS1 Use & Care Manual

Table of Contents

Advertisement

30
Care and Cleaning
Replacing LED Lights
Both the freezer and fresh food compartments of your
refrigerator include LED lights. Always use Electrolux
parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator's power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and pull the
connector with the other hand while pressing the
connector latch.
4 Replace LED light and snap in place assuring the
light is facing in toward the unit (inside fresh food
and freezer).
LED Light Harness Removal
NOTE
LED lights are in series so if one is bad or unplugged,
several lights may not light up.

Replacing Light Bulbs

Both the freezer and fresh food compartments of your
refrigerator include incandescent light bulbs that will
need replacing from time-to-time. Some lights have
covers that need to be removed before replacing the
bulbs. Always use bulbs that are designed for appliance
lighting.
(select models)
LED Light Removal
(select models)
CAUTION
Wear gloves when replacing incandescent light
bulbs to avoid getting cut.
To replace light bulbs:
1 Unplug your refrigerator's power cord.
2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an appliance
bulb of the same type and wattage (normally 40
watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator's power cord.
Light
Bulb
Refrigerator
Light Cover
Refrigerator Light
Light
Bulb
Freezer
Light Cover
Freezer Light
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online at
www.electroluxappliances.com, or through the dealer
where you bought the refrigerator. Here is the product
number to request when ordering:
LED Light, Part #241891102
Incandescent Lights (40-watt bulb), Part
#5305514148
Light Sockets
Located Behind
Glass Shelves
Light
Bulb
Light Sockets
Located Behind
Glass Shelves
Light
Bulb

Advertisement

Table of Contents
loading

Table of Contents