Storage Features - Electrolux EI33AR80WS Use & Care Manual

Full Width Cantilever Shelves
Multi-position adjustable glass shelves
can be moved to any position for larger or
smaller packages. The shipping spacers that
stabilize the shelves for shipping may be
removed and discarded.
To Adjust The Shelves
• Remove all food from the shelf.
• Shelves are heavy. We recommend
using 2 hands to install and remove the
shelf. We recommend placing 1 hand
centered on the front trim and the other
hand centered under the rear of the
shelf.
• Lift the front edge up at a slight angle
to release the tabs from the slots in the
rear. Continue lifting the shelf vertically
until the shelf clears the built-in shelf
supports located on the sides of the
cabinet. Then pull the shelf out.
• Replace the shelf by inserting the
mounting bracket hooks into the
desired support slots at the rear.
• Carefully lower the shelf and lock it into
position.
IMPORTANT
Carefully handle the shelves when
removing and installing them to prevent
making contact with the cabinet liners and
the stainless steel rear air tower.
Do not block the air-flow vents located on
the back wall of the air-tower with
the shelves.

STORAGE FEATURES

Slide-Out Shelf
The slide-out shelf can hold many different
containers and food types for your convenience.
We recommend opening and closing the
slide-out shelf by grabbing the shelf with a
single hand in the middle of the shelf handle.
To remove the slide- out shelf:
1. Remove all items from the shelf.
2. We recommend using 2 hands to
remove and install the shelf from the
slide rail supports. Remove the shelf by
pulling it out until it is fully extended.
Lift up on the front of the handle area
and lift it out.
3. Carefully handle the shelf to prevent
making contact with the cabinet liner
during removal and installation.
23