Preparing To Use Pixma Cloud Link From Your Printer - Canon MG6400 SERIES Online Manual

For information on the LAN and Internet settings, see the manual of your network devices or contact
the manufacturer.
Important
• The user will bear the cost of Internet access.
• Printer software (firmware) version
If the printer's firmware version is earlier than Ver. 2.000, you need to update the firmware.
Refer to "Firmware update" for your model from the Home of the Online Manual for details.
Important
• When you update the firmware of this product, the displayed screens, the operation procedures,
and the functions may change.
• If you register a photo-sharing service to your printer and then later update the printer firmware,
the photo-sharing service will be deregistered. Please perform the account setup again.

Preparing to use PIXMA Cloud Link from your printer

Follow the steps described below to register the printer information.
The screen display differs depending on your computer.
1. Check that the printer is connected to the Internet
2. From the printer home screen, select
3. Registration to the server will take place
When the registration completed screen appears, select OK.
4. On the confirmation screen, select Next
Cloud
29