Printing The Nozzle Check Pattern - Canon MG6400 SERIES Online Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print
head nozzle.
Watch the movie
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
Replace the ink tank whose ink is low.
Replacing an Ink Tank
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the front tray.
3. Open the paper output tray gently.
4. Print the nozzle check pattern.
(1) Select
LCD and Operation Panel
The setup menu screen will appear.
(2) Select
The Maintenance screen will appear.
(3) Select Print nozzle check pattern, then press the OK button.
The confirmation screen will appear.
(4) Select Yes, then press the OK button.
Setup on the HOME screen.
Maintenance, then press the OK button.
168