Canon MG6400 SERIES Online Manual page 204

3. If necessary, complete the following settings:
Auto Power On
Specifying Enable from the list will turn the machine on upon receipt of print data.
Auto Power Off
Specify the time from the list. When this time lapses without any operations from the
printer driver or the machine, the machine is turned off automatically.
4. Apply the settings
Click OK. When the confirmation message appears, click OK.
The Maintenance tab is displayed again.
The auto power on/off function is enabled hereafter. When you want to disable this
function, select Disable from the list according to the same procedure.
Note
When the machine is turned off, the status monitor message varies depending on the
Auto Power On setting.
When the setting is Enable, "Printer is standing by" is displayed. When the setting is
Disable, "Printer is offline" is displayed.
Important
If you connect this machine to a network and use it, you can set Auto Power Off but
the power will not switch off automatically.
204