General Operation; Remote Control - Sanyo CP28WF2 Instruction Manual

GENERAL OPERATION

Remote control

To switch the sound from the speakers.
The sound changes as follows;
normal -> attenuate -> mute
To switch TV, AV1, AV2 or AV3 mode repeated-
Nicam/Bilingual selector
To switch the sound mode as follows;
NICAM/STEREO or MONO in the nicam or
stereo programmes. A, B or MONO in the
nicam or bilingual programmes.
If the nicam or stereo sound reception is poor
in quality, you can switch to "MONO" sound
reception by pressing this button.
Direct programme selector
For direct access to programmes using the (0-
9) numeric button.
For selection of analogue programme position
10 - 99, for example 23, first press the -/--
button and press 2 and 3 numeric button.
Surround mode selector
To select the surround mode, ACTIVE, MONO,
To switch the on screen-display menu on/off.
Level down/up
To adjust the sound and picture control level.
Also operates as left and right cursor.
Programme down/up
To select the next programme number or previ-
ous programme number. Also operates as up
and down cursor.
4
Sound mute
TV/AV selector
ly. (p.9, p.10)
OFF. (p.9)
MENU
Screen mode selector
To select the screen mode, AUTO, NATURAL,
ZOOM(14:9), TITLE-IN(14:9), ZOOM(16:9),
TITLE-IN(16:9), FULL or NORMAL. (p.8)
Standby/Power-on
To switch the TV on and off.
Picture mode selection
To access a series of picture mode: PERSON-
AL, STANDARD, ECO and DYNAMIC. (p.7)
Programme information call/Sound
system selector
To display the programme information on the
screen.
It also operates as sound system selector.
(p.6)
Channel mode selection
To enter channel number of the station direct-
ly. (p.6)
Time display
To switch displaying the present time on the
screen if the station provide a teletext.
Programme alternation
To switch back to the previous programme
position watched.
Bass Expander switch
To switch on/off the Bass Expander.
Teletext/TV selector
To switch TV, MIX and Teletext mode.
(p.14, p.15)