General Operation - Sanyo CA21KF3 Instruction Manual

General Operation

General use
Power ON/OFF (Stand by)
Press the Power ON/OFF button to turn
on or off the TV set.
Direct Programme Selector
For direct access to select
-/- -
programmes using (0~9) NUMERIC
button.
To select programmes position more
than 9, press DIGIT button, and then
insert programme position number one
by one. (Example programme position
-/- - -/- -
17, press digit, press 0, press 1,
-/- -
press 7.)
-/- -
Programme Up and Down
CH
To select next and previous pro-
gramme position and also operates as
up and down cursor.
-/- -
CH
Volume Control
To increase and decrease Volume
Level, press VOLUME + or - buttons.
VOLUME VOLUME
Sound Mute
To mute the TV's sound, press MUTE but-
ton, and to switch the sound back on,
press MUTE button again, or press VOL-
UME + or -.
Alternate
Press the ALTERNATE button, and the
P P
programme position will alternately select
the previous position and the present
position.
Picture Mode
Select Picture Mode to suit picture type you
are watching, by pressing PICTURE MODE
button. Each time PICTURE MODE button
is pressed, the picture setting changes as
PICTURE
follow; PERSONAL, DYNAMIC, NATURAL,
ECO, GAME.
-/- -
30 30
-/- -
Auto Shut Off Function
-/- -
This TV set changes to the standby mode within
10 minutes after all broadcasts have ended.
-/- -
STEREO (Nicam)/MONO
By pressing the STEREO (NICAM)/MONO
button repeatedly, you can select the
sound track L/L (left), R/R (right), or L/R
A B
•
from the equipment connected to the AV
terminal.
Woofer/Bass Expander
Press the Bass Expander/Woofer but-
BASS
ton to switch this function ON or OFF.
Surround
Press the SURROUND button to switch
SURROUND
this function on SURROUND : 1, SUR-
ROUND : 2 or SURROUND : OFF posi-
tion.
Recall/Colour System
To display the on screen indication, press
RECALL/COLOUR SYSTEM button.
This button also used to select colour sys-
?
tem mode, if the poor quality picture is
being received.
By pressing the RECALL/COLOUR SYS-
-/- -
TEM button repeatedly, the colour system
mode will changed as follow;
AUTO PAL
-/- -
Sound System
If the sound that is being received is of poor
quality, change the sound system mode by
S. SYS
pressing SOUND SYSTEM button.
BG
Sound Mode
Select Sound Mode to suit sound type you
SOUND
are listening, by pressing SOUND MODE
button. Each time SOUND MODE button is
i
pressed, the picture setting changes as
follow; PERSONAL, MUSIC, TALK,
NORMAL.
NTSC4.43
SECAM
DK
I M
NTSC3.58
5
5