Table of Contents
Advertisement
General Operation
Power ON/OFF
To switch on or off the TV ;
Press the Mains ON/OFF button.
The power of the TV is turned on or off com-
pletely. If no picture appears but the Standby
and Power indicator illuminates, press the
Power ON/OFF button of the remote control
transmitter as the TV set is in standby
mode.
To set the TV to standby mode;
Press the Power ON/OFF button.
During Standby mode the Standby and
Power indicator illuminates more brightly.
TIMER
1
2
To turn on the TV from the standby
mode, press any of the following button.
Power ON/OFF button of the remote
control transmitter.
Programme UP/DOWN of the remote
control transmitter or the TV set.
1 to 9, 0 button on the remote control
transmitter.
Important !
Be sure to set the Mains ON/OFF switch to
the off position, if the power failure occurs
while viewing.
Auto Shut Off Function
This TV set incorporates the AUTO SHUT
OFF function. Even if the TV is left on after
you have gone to sleep, the TV set changes
to the standby mode within 10 minutes after
all broadcasts have ended.
8
TV/AV
3
4
OFF 0:10
Direct Programme Selection
Example
To select programme position 8;
8
8
Press "8" button.
To select programme position 10;
-/--
- -
Press the Digit button. Press "1"button. Press "0" button.
To select programme position 27;
-/--
- -
Press the Digit button. Press "2"button. Press "7"button.
Programme Up and Down
Press the Programme UP (P
select the next programme position.
Press the Programme DOWN (P
to select the previous programme position.
Channel Scanning
Press the CHANNEL SCAN button to
search for a programme. The channel posi-
tions are automatically scanned, and the
channel scanning will stop at the position
where it began. To stop at the position you
want, press this button again.
CH SCAN
1
0
1 -
7
2
2 -
) button to
) button
7
8
9
10
11
10
27
Advertisement
Table of Contents
