Vcr/Dvd Controls - Sanyo CP28WF2 Instruction Manual

USE OF AV EQUIPMENT
Use of front AV3 terminal
This TV provides one pair of AV input terminal on the front panel. It is very
convenient for use as a game or camcoder connection.
1
Connect an RCA cable from the front AV terminal (AV3) to a camcoder
or to game equipment.
2
Press the button repeatedly to select the AV3 mode.
For monaural units, connect the sound cable to the L-socket.
AV3 INPUT VIDEO L-AUDIO-R
Camcoder, TV Game etc.
Use of Headphone
The 3.5mm mini-stereo jack socket located behind the door of the TV can
be used for headphone.
When the headphone are inserted the sound from the TV speakers is
muted.
AV3 INPUT VIDEO L-AUDIO-R
Use of AV Output Jacks
This TV provides the AV monitor output jacks on the rear of the cabinet
back. You can connect your AV equipment to these jacks.
AV2 IN
MONITOR
OUT
(MONO)
S-VIDEO
AV1 IN
The picture signal being displayed on the TV screen is output through the
Monitor Output Jacks. Use these terminals to record TV broadcasts and
for video dubbing from AV1, AV2 or AV3 input terminals.
10
TV/AV
MENU
From Camcoder
or video game
equipment
TV/AV MENU
VIDEO
L
AUDIO
R
ANT. 75Ω
To AV equipment

VCR/DVD controls

This remote control transmitter has been designed to be used in conjunc-
tion with selected SANYO VCR's and DVD players. Some SANYO VCR's
and DVD players may have their own functions, so please refer to the indi-
vidual instruction booklet when using this remote control to ensure com-
patibility.
Some of the keys are used for both the VCR and DVD player. The sym-
bols indicated with blue are for the keys to control the DVD player. When
use the DVD player with this remote control, first press and hold the DVD
button and then press your desired control button each time.
CH
CH
Power
Play
Pause
Stop
Fast/Cue
Rewind/Review
Record, press both button at same time.
DVD n/a
OK
n/a
n/a
VCR
Power
Play
Pause
Stop
Next chapter selection
Previous chapter selection
n/a
DVD command mode selection
Enter
Cursor selection
DVD