Keys On The Tv - Sanyo CP28WF2 Instruction Manual

GENERAL OPERATION

Keys on the TV

Each button listed in this section has the same function as
it's corresponding button on the remote control.
AV3 INPUT
Headphone Jack
"AV3" Video/Audio-input Jacks
Operation
Switching-on/off with mains switch
To turn the TV set ON, press the Mains ON/OFF switch on the front of
the TV. The power indicator illuminates red to show the power is on.
To turn the TV set OFF completely, press the Mains ON/OFF switch
again.
TV/AV
MENU
AV3 INPUT L-AUDIO-R
VIDEO
If no picture appears but the power indicator is on, press the
Standby/Power-on, P , P
standby mode.
Switching into/from standby mode
To switch the TV set into the standby mode, press the Standby/Power-
on button.
The red power indicator illuminates more brightly.
To switch the TV set ON from the standby mode, press any of the
following buttons;
Standby/Power-on button of the remote control transmitter.
Programme UP/DOWN of the remote control transmitter or the
TV set.
1 to 9, 0 button on the remote control transmitter.
TV/AV MENU
L-AUDIO-R
VIDEO
MENU
TV/AV Selector
CH
or 0 - 9 button as the TV set is in the
Stand-by and Power Indicator
Remote Control Detector
CH
Programme up/down
Level up/down
If you find the power indicator flashing, please turn the TV
!
set off completely with the Mains ON/OFF switch and con-
tact our service desk.
This warning is a sign to let you know that the power protec-
tion function of this TV set is now operating.
Auto Shut Off
This TV set will automatically switch into the standby mode, 10 minutes
after a signal is no longer received. The time until the set will switch off is
displayed on the screen.
OFF 0:10
When the TV set is switched on by using the ON-Timer function with no
signal being received, this function will be ignored.
Mains ON/OFF switch
5