Installation - Currys Essentials CFSE10WH Instruction & Installation Manual

Installation

• The cooker must be installed by a competent person, if in doubt consult a qualified technician, and in
compliance with local electrical, safety and building regulation standards. This cooker can be installed next to a
cabinet.
• If the cooker is installed adjacent to furniture which is higher than the hob, a gap of at least 150 mm must be
left between the side of the cooker and the furniture unless non-combustible materials are used which then
allows this distance to be reduced to 20 mm.
• The furniture walls adjacent to the cooker must be made of heat resistant material. The veneered synthetic
material and the glue used must be resistant to a temperature of 90°C in order to avoid ungluing or
deformations.
• The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room containing a bath
or shower.
• Curtains must not be fitted immediately behind appliance or within 500 mm of the sides.
• This cooker must NOT be placed on a pedestal or base.
• It is essential that the cooker is positioned as stated or freestanding taking into account the distances of any
combustible materials detailed above.
• Any cooker hoods must be installed according to the requirements of the cooker hood instruction/installation
manual.
• Only cooker hoods may be installed directly above the cooker. Cupboards must not be fitted directly above the
cooker.
Cupboard
Remarks:
X : 150mm for combustible materials
20mm for non-combustible materials.
14
CFSE10WH_SV_final110426_flo.indd 14
Cooker Hood
26/04/2011 7:35 PM