Denon AVR-1804 Operating Instructions Manual page 33

PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to "Program Type (PTY)".
1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Press the RDS button until
"PTY SEARCH" appears on
the display.
(Main unit)
3
Watching the display, press
the PTY button to call out the
desired program type.
(Main unit)
4
Press the PRESET D (+) or H (–) button to
automatically begin the PTY search operation.
(Main unit) (Remote control unit)
If there is no station broadcasting the
designated program type with above operation,
all the reception bands are searched.
5
The station name is displayed on the display
after searching stops.
1 4 2 3
1
4
6
To continue searching, repeat step 4.
If no other station broadcasting the designated
program type is found when all the frequencies
are searched, "NO PROGRAMME" is displayed.
TP search
Use this function to find RDS stations broadcasting traffic program (TP stations).
1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Press the RDS button until
"TP SEARCH" appears on
the display.
(Main unit)
3
Press the PRESET D (+) or H (–) button TP
search begins.
(Main unit) (Remote control unit)
If no TP station is found with above operation,
all the reception bands are searched.
4
The station name is displayed on the display
after searching stops.
5
To continue searching, repeat step 3.
If no other TP station is found when all the
frequencies are searched, "NO PROGRAMME"
is displayed.
ENGLISH
1 3 2
1
3
33