Denon AVR-1804 Operating Instructions Manual page 26

ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
Playback with a digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
Example: DVD
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or DTS.
(Main unit) (Remote control unit)
2
Select the Dolby/DTS Surround mode.
(Main unit) (Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro Logic II or DTS NEO:6.
(Main unit) (Remote control unit)
3
Play a program source with the
mark.
• The Dolby Digital indicator lights
DIGITAL
when playing Dolby
Light
sources.
• The DTS indicator lights when
Light
playing DTS sources.
Operate the SURROUND BACK button to
switch Surround Back CH ON/OFF.
(Main unit) (Remote control unit)
• Lights when the SURROUND BACK button is
on.
26
1 1 3
3 2 2
2
1
5
4, 5
7
6 6
3
5
1
,
Digital
Light
4
(Main unit)
5
4, 5 2, 6
(Main unit) (Remote control unit)
6
(Main unit)
7
(Remote control unit)
2 Dialogue Normalization
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level
(standard level) of the signals which are recorded at different levels for different program sources, such as DVD,
DTV and other future formats that will use Dolby Digital.
These contents can be verified with the ON SCREEN button.
Display
OFFSET - 4dB
Display the surround parameter menu.
(Remote control unit)
Select the various parameters.
Adjust the parameter settings.
(Remote control unit)
Press the ENTER button to finish surround parameter mode.
The number indicates the normalization level when the currently playing
program is normalized to the standard level.