Using Anynet+ (Hdmi-Cec) - Samsung UN32J5500AFXZA E-Manual

Using Anynet+ (HDMi-CEC)
You can use the TV's remote control to control external devices that are connected to the TV by
an HDMI cable and that support Anynet+ (HDMI-CEC). Note that you can only set up and operate
Anynet+ (HDMI-CEC) with the remote control.
Setting up Anynet+ (HDMI-CEC}
IMIEINU> System > Anynet+ (HDMI-CEC} _
- Anynet+ (HDMI-CEC} _:!/:_
You can enable or disable Anynet+ (HDMI-CEC). Set to Off or On to disable or enable all Anynet+
related functions.
, Auto Turn Off _
When set to Yes, turns off Anynet+ compatible external devices when the TV is turned off.
This funcdon is not supported H)y some Anynet+ compatib e devices,,
. Device search
Automatically searches for and identifies Anynet+ (HDMI-CEC) compatible external devices that
are connected to the TV.
Using Anynet+ (HDMI-CEC}
Viewing Anynet+ (HDM_CEC)_compliant devices
After connecting external devices to the TV, select IMIEINU> System > Anynet+ (HDMI-CEC) >
Device Search. The TV displays a list of Anynet+ (HDMI-CEC)-compliant devices that you can set up
as Anynet+ (HDMI-CEC)-enabled devices (i.e., devices that can be controlled with the TV's remote
control). To set up an Anynet+ (HDMI-CEC)-compliant device as an Anynet+ (HDMI-CEC)-enabled
device, you must select it on the Source screen. Follow the instructions in the next section.