Table of Contents
Advertisement
Using
the timers
Using
the s_eep timer
IMIEINU> System
> Time > Sleep Timer'
You can use this function
to automatically
shut off the TV after a pre-set
period
of time.
You can set
the timer
in 30 minute
increments,
for up to 3 hours.
Turning
on the TV using
the on timer
IMIEINU> System
> Time > On Timer
You can set On Timer
to make the TV turn on automatically
at a specific
time. You can use up to three
separate
configurations:
On Timer
1, 2, and 3. On Timer
is only available
when Clock
has already
been
set.
If you select Manual,
you can highlight
and select each day to select the specific
days that you
want On Timer
to turn on the TV.
o
Time
o
Volume
e
Souroe
From the list, select a signal
source for the TV to use when it turns on. If you want to play
content
saved in a USB device or content
from an HDMI or Component
source,
such as a DVD
player, Blue-ray
player, or set-top
box, connect
the device to the TV before
you start On Timer
setup.
For On Timer to function,
you must keep the device connected
to the TV.
o
Antenna
Allows
you to select a broadcast
signal
source, Air or Cable, when source
is set to TV.
o
Channel
Allows
you to select a channel
when source is set to TV.
Hide quick links:
Advertisement
Table of Contents
