Advertisement
61. Secure the vehicle 5-pin connector (disconnected in
step 40) to the vehicle harness with one wire tie.
ANTENNA
VEHICLE
CABLE
5-PIN
CONNECTOR
WIRE
TIE
VEHICLE
HARNESS
62. Secure the antenna cable with two wire ties to the
vehicle harness.
63. Route the antenna cable along the engine starter
harness.
ANTENNA
CABLE
WIRE TIE
(Loosely
secured.)
ENGINE
WIRE TIE
STARTER
(Loosely
HARNESS
attached.)
64. Secure the antenna cable to the engine starter
harness with the four wire ties you loosely attached.
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
2 WIRE TIES
6D1844AY
VEHICLE
HARNESS
WIRE TIE
(Loosely
attached.)
WIRE TIE
6D1845BY
(Loosely
attached.)
AII 38576-38846 (0802)
Installing the Control Unit
65. Install the control unit bracket to the control unit.
CONTROL
UNIT
66. Plug the engine starter harness 28-pin connector
into the control unit.
28-PIN
CONNECTOR
CONTROL
UNIT
CONTROL UNIT
BRACKET
ENGINE STARTER
HARNESS
CLIP
CONTROL UNIT
BRACKET
6D18461Y
6D1847BY
17 of 23
Advertisement
